The large volume of the tank body of the automatic feeding flat mixer truck not only affects the cost of purchasing the car, but also affects the function of the vehicle. The driving coefficient is low, the larger the tank body, the higher the center of gravity, and the vehicle stability is poor. Therefore, car owners and friends should choose a suitable automatic feeding flat mixer truck according to the working conditions, economic benefits, functions and other factors of the mixer truck operation.

How to choose the capacity of the automatic feeding flat mixer? (figure 1)

So after all, how to choose the tank capacity of the automatic feeding flat mixer truck? First of all, the tank capacity of the automatic feeding flat mixer truck cannot be simply assumed to be the capacity of the tank. There must be three clear conceptual differences:

1. The geometric capacity of the automatic feeding flat mixer truck: the actual geometric capacity in the mixing barrel refers to the geometric capacity calculated by the mathematical method for the setting of the mixing tank.

2. Mixing dynamic capacity: the amount of ready-mixed concrete that can be transported by the automatic feeding flat mixer truck (in terms of the volume after tamping). The volume of ready-mixed concrete that can be unloaded when arriving at the project site as an automatic feeding flat mixer truck is calculated as 2400kg/m3.

3. Mixing capacity: the automatic feeding flat mixer truck is placed in a horizontal position, the unmixed concrete material (including water) that the mixing bucket can accommodate, and the amount that can be mixed and transported to the concrete (calculated by the volume after tamping) .

The connection between the three should be: the geometric capacity of the mixer > the mixing capacity > the dynamic capacity of the mixing. The capacity that users often say should refer to the mixing capacity, so when purchasing a mixing vehicle, pay attention to the difference and ask the mixing capacity of the vehicle.