The utilization of tap water in the production of mixing plants is further not a critical tap water stage. Because the concrete is very difficult to solve after setting, it takes a lot of water to wash the concrete mixer and tanker every day. So how should we control the water consumption of the concrete mixer?

How to control the water consumption of concrete mixer equipment?

1. According to the intake of superplasticizers or superplasticizers with high water-reducing rate, choose superplasticizers and concrete types with good adaptability. Improve the mix ratio of sand and stone, find the mix ratio of sand and stone for each mortar mix ratio to improve workability, thereby reducing water consumption.

2. It is necessary to strictly inspect the performance of each material and control the above elements to reduce the water consumption. Improve workability based on the use of high intakes of cementitious materials. Check the water content of the sand and gravel more, improve the sense of responsibility, and ensure that the slump of the concrete is within the control range for each output rate. Concrete flat mixer

3. It is very important to communicate with the construction unit of the mixing equipment construction site. To get the understanding of the construction team, it is necessary to cooperate with the construction unit method staff to prevent excessive slump. Appropriate concept: It is not that the greater the slump, the easier the underwater concrete will be, but the workability and the amount of sand and gravel used should be adjusted.

This is all very reasonable and likely to control the water consumption of the mixing equipment. Everyone must be careful during the actual operation to prevent the indulgence of the water source.